Roland VersaUV LEF-200, Руководство по первому запуску

Страница: 37 / 52

Prepare for Using This Printer
35
3. Set the gateway address.
1.
On the screen of step 7 of “2. Set the subnet
mask.” (P. 34), press [ ].
The screen shown below appears.
NETWORK
GATEWAY ADDR.
2.
Press [ ] twice.
The screen shown below appears.
GATEWAY ADDR.
000.000.000.000
3.
Press [ ] or [ ] to select the address number.
4.
Press [ ].
5.
Repeat steps 3 and 4 to set the gateway
address (255.255.255.255).
For the value to enter for the gateway
address, consult your network administrator.
Here, "255.255.255.255" is entered by way of
example.
GATEWAY ADDR.
255.255.255.255
6.
When you have finished making the setting,
press [ENTER].
7.
Press [ ].
The screen shown below appears again.
NETWORK
GATEWAY ADDR.
Make the Port Settings for the RIP &
PRINT MANAGEMENT SOFTWARE
• Install the RIP & PRINT MANAGEMENT
SOFTWARE and set it up. For the print
destination, use the IP address set on the
printer. For information about how to make
the settings, refer to the documentation for
the RIP & PRINT MANAGEMENT SOFTWARE.
• You can check whether the connection to
the network has been made by using the
printing-test feature of the RIP & PRINT
MANAGEMENT SOFTWARE. For information
about how to carry out a printing test, refer
to the documentation for the RIP & PRINT
MANAGEMENT SOFTWARE.