manualshive.com logo in svg

Roland TurboStart SX-700, Дополнительные заметки

Поделиться
Скачать
Roland TurboStart SX-700 Скачать руководство пользователя страница 69

®

 

 

   

Supplemental

Notes

September 25, 1996

SN59 Ver. 1.0

© 1996 Roland Corporation U.S.

Connecting Multiple VS-880s

Page 1 of 4

Connecting Multiple VS-880s

This document will explain how to connect multiple VS-880s so that they play in sync with each other and so that
the audio from both VS-880s is monitored from the master unit.

Connecting Two VS-880s

Connections
1. 

Connect the MIDI OUT port of the master VS-880 to the MIDI IN port of the slave.

2. 

Connect the Digital output of the slave VS-880 to the Digital input of the master.

NOTE: Make sure that both VS-880s are powered on and that the current song’s sampling rate (48kHz,
44.1kHz, or 32kHz) is the same on both units. If you are unsure what the current song’s sampling rate is set
to, press SONG (under EDIT CONDITION) until “SNG Song Select?” is displayed. Press YES/ENTER and the
sampling rate and record mode will be flashing. The sampling rate is linked to the song. If the sampling rates
do not match you will need to create a new song on one of the VS-880s with a sampling rate that matches the
other unit.

Settings for the Master VS-880
One of the easiest ways to sync two VS-880s together is to designate one of them as the master unit sending
MIDI Time Code and the other unit as the slave set to external sync. Use the following procedure to setup a
VS-880 as a master device in this scenario.

1. 

Press SYSTEM until “MIDI PRM?” is displayed. Press YES/ENTER.

2. 

Press PARAMETER right until “MIDI Thru” is displayed. Use the TIME/VALUE dial to select “MIDI Thru = Out.”

3. 

Press PARAMETER right until “SysEx Tx” is displayed. Use the TIME/VALUE dial to select “SysEx Tx = Off.”

4. 

Press PARAMETER right until “MMC” is displayed. Use the TIME/VALUE dial to select “MMC = Off.”

5. 

Press PARAMETER right until “CtrLocal” is displayed. Use the TIME/VALUE dial to select “CtrLocal = On.”

6. 

Press PARAMETER right until “CtrType” is displayed. Use the TIME/VALUE dial to select “CtrType = Off.”

7. 

Press SYSTEM until “Sync/Tempo PRM?” is displayed. Press YES/ENTER.

8. 

“Syn:Source” will be displayed. Use the TIME/VALUE dial to select “Syn:Source = INT.”

9. 

Press PARAMETER right until “Syn:Gen” is displayed. Use the TIME/VALUE dial to select “Syn:Gen = MTC.”

10.  Press SYSTEM until “System PRM?” is displayed. Press YES/ENTER.
11.  “SYS Master Clk” will be displayed. Use the TIME/VALUE dial to select “SYS Master Clk = DIGITL.”

 
Settings for the Slave VS-880
Use the following procedure to setup the other VS-880 as a slave device.

1. 

Press SYSTEM until “MIDI PRM?” is displayed. Press YES/ENTER.

2. 

Press PARAMETER right until “SysEx Rx” is displayed. Use the TIME/VALUE dial to select “SysEx Rx = Off.”

3. 

Press PARAMETER right until “MMC” is displayed. Use the TIME/VALUE dial to select “MMC = Off.”

4. 

Press PARAMETER right until “CtrLocal” is displayed. Use the TIME/VALUE dial to select “CtrLocal = On.”

5. 

Press PARAMETER right until “CtrType” is displayed. Use the TIME/VALUE dial to select “CtrType = Off.”

6. 

Press SYSTEM until “Sync/Tempo PRM?” is displayed. Press YES/ENTER.

7. 

“Syn:Source” will be displayed. Use the TIME/VALUE dial to select “Syn:Source = EXT.”

8. 

Press PARAMETER right until “Syn:Gen” is displayed. Use the TIME/VALUE dial to select “Syn:Gen = Off.”

Digital In

Digital Out

MIDI OUT

MIDI IN

Master Unit

Slave Unit

Содержание TurboStart SX-700














































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды