Roland Stika SV-12, Руководство пользователя, Страница: 33 / 64

3-2 Cutting
Chapter 3: Performing Cutting 31
➍
Click the [Size] tab.
➎
Set the cutting range to match the loaded
material size.
For the width, click [ ] to select either 250 (9.84 in.)
or 340 mm (13.39 in.) (SV-15 only).
(* Set to 250 mm (9.84 in.) if you are using the
included test-use material.)
The width cannot be changed on the SV-12/8
models.
For the length, set a range that subtracts the mar-
gin from the loaded material length.
☞
p 58 "Cutting Range"
➏
Click [OK].
The white area is the cutting
range. Text or shapes drawn
outside this range are not cut.
The cutting range has now been set.
➐
Click [OK] again to close the [Cutting Setup]
screen.