Roland Stika SV-12, Руководство пользователя

Страница: 16 / 64

Chapter 1: Setup Preparation 14
1-3 Installing
Deciding On an Installation Site
Install in a stable location offering good operating conditions. An unsuitable location can cause accident, faulty
operation, or breakdown.
WARNING Never use out of doors or in any location where exposure to water or high humid-
ity may occur. Never touch with wet hands.
Doing so may result in fire or electrical shock.
WARNING
Never place any flammable object nearby. Never use a combustible aerosol spray
nearby. Never use in any location where gases can accumulate.
Combustion or explosion may be a danger.
WARNING Position so that the power plug is within immediate reach at all times.
This is to enable quick disconnection of the power plug in the event of an emergency.
Install the machine next to an electrical outlet. Also, provide enough empty space to
allow immediate access to the electrical outlet.
CAUTION
Install in a location that is level and stable.
Installation in an unsuitable location may cause an accident, including a fall or tipover.
Unsuitable Installation Sites
➢
Locations subject to shaking or vibration
➢
Locations where the floor is tilted, not level, or unstable
➢
Dusty locations
➢
Locations exposed to considerable electrical or magnetic noise, or other forms of electromagnetic energy
➢
Locations with poor heat radiation
Installation Space
The material moves forward and backward during
cutting. Do not place any objects in front of or
behind the material. Make sure that there are no
obstructions (such as a wall, etc.) behind the
machine.
Leave enough space so
that the power cord can
always be reached.
Leave enough space so
that no objects touch the
sheet feed knob.