61
Display Messages
■
E.30
fig.E.30
Meanings:
• The performance data is excessively large, and cannot be
loaded.
• Since the internal memory is full, recording is not
possible.
■
E.40
fig.E.40
Meanings:
• The AT-10S cannot deal with the excessive MIDI data
sent from the external MIDI device. Reduce the amount
of MIDI data sent to the AT-10S.
■
E.41
fig.E.41
Meanings:
• A MIDI cable or computer cable has been disconnected.
Connect it properly and securely.
■
E.43
fig.E.43
Meanings:
• The Computer Switch is set to a wrong position or the
computer is set wrongly. Switch off the AT-10S then set
the Computer Switch to the correct position and set the
computer correctly. After that, switch on the AT-10S
again.
■
E.51
fig.E.51
Meanings:
• There is something wrong with the system. Repeat the
procedure from the beginning.
■
Others
fig.ot-02
Meanings:
• The AT-10S is warning you that its memory will soon
become full to capacity, so not much more recording can be
done.
fig.ot-03
Meanings:
• To carry out the procedure, you first need to erase perfor-
mance data in the AT-10S. This message asks you to
confirm that you don’t mind doing this. To erase the data,
press the [Rec] button.
When you do not want to erase it, press the [Reset] button
then save the data on disk.
fig.ot-05
Meanings:
• There already is performance data having the same name
on the disk.
To replace the existing data with the new version, press the
[Rec] button. To save it as a separate new file, press the
[Reset] button first. Then, after changing the name, save it
on disk.
Содержание Music Atelier AT-10S
Страница 76: ......
