Roland Music Atelier AT-10S, Руководство пользователя

Страница: 54 / 76

54
Various Other Settings (Function Button)
4.
Press the [Function] button.
The Basic screen will reappear.
5.
Re-record the performance (p. 47).
Master Tune
The basic pitch of an instrument is generally considered as
the pitch of the middle A note. The “Master Tune” parameter
lets you adjust this basic pitch to match the pitch of any other
instruments that are playing together with the AT-10S.
1.
Press the [Function] button.
2.
Press the Select [-] [+] buttons to select “Master
Tune.”
fig.12-27
3.
Press the Value [-] [+] buttons to adjust the
basic pitch.
Settings 415.3Hz – 466.2Hz (0.1 Hz units)
➔
By pressing the Value [+] and [-] buttons simultaneously, you
can restore the default setting (440.0 Hz).
To return to the basic screen, press the [Function] button.
➔
This setting remains stored in memory even while power is
turned off.
LCD Contrast
This setting allows you to adjust the contrast of the display.
1.
Press the [Function] button.
2.
Press the Select [-] [+] buttons to select “LCD
Contrast.”
fig.12-28
3.
Press the Value [-] [+] buttons to adjust the con-
trast of the screen.
Available settings 1–10 (higher values will darken
the display)
To return to the basic screen, press the [Function] button.
➔
This setting remains stored in memory even while power is
turned off.
Tx MIDI Channel
(MIDI Output Channel)
When you use the MIDI connectors or the computer
connector of the AT-10S to transmit musical data to external
devices, for each keyboard (Upper, Lower, and Pedal) you
can specify the channel on which your playing will be trans-
mitted as MIDI messages. (Value: 1–16)
You can modify these Tx (Transmit) MIDI settings as needed.
(For details refer to p. 57)
1.
Press the [Function] button.
2.
Press the Select [-][+] buttons to select either
“TxMIDI Channel: Upper,” “TxMIDI Channel:
Lower,” “TxMIDI Channel: Pedal,” or “TxMIDI
Channel: Control.”
fig.12-22
Part Upper, Lower, Pedal, Control
3.
Press the Value [-][+] buttons to select the MIDI
transmission channel.
Channel 1-16
To return to the basic screen, press the [Function] button.
* The CONTROL part transmits expression pedal data.
* It is not possible to set more than one part (Upper, Lower and
Pedals) to the same channel.
➔
The MIDI message of the Control track remains stored in
memory even while power is turned off.