Roland Music Atelier AT-10S, Руководство пользователя

Страница: 59 / 76

59
Troubleshooting
MIDI messages received at MIDI In are not sounded
❍
The Computer switch is not set to “MIDI” position (p. 57).
❍
The Computer switch was set to “MIDI” after the power
was turned on.
Turn off the power, and then turn the power on once
again.
Sound is distorted / cracked
❍
The Part Balance volume of each part is too high (p. 23).
❍
The Reverb volume has been raised when the volume of
each Part Balance button is already raised.
Either lower the Reverb volume, or adjust the Part Balance
of each part (p. 23).
❍
The [Master Volume] knob has been used to raise the
overall volume excessively (p. 14).
Some keys (of certain keyboard parts) sound
strange
❍
You’ve assigned the same voice, using the same range, to
multiple parts.
When playing the same sound in the Upper
keyboard and Lower keyboard, the volume is
different
❍
On one of the keyboards, “Initial Touch” is turned ON (p.
48).
Lower keyboard cannot be heard
❍
The Lower keyboard will not produce sound while an
Intro or Ending is being played.
The sound is not played correctly
❍
If you layer the same type of sound (for example, Strings1
and Strings5), the timing at which you play a note or the
phrase relationship between the two sounds may affect
the way in which the sounds are heard, but this is not a
malfunction.
Can’t play the demo songs
❍
A floppy disk is inserted in the disk drive.
In order to play the demo song, you must remove the
floppy disk from the disk drive (p. 17).