Roland MC-808 Скачать руководство пользователя страница 93

Страница: 93 / 156

Editing rhythm sounds (Rhythm Edit)

Patch/Sample mode

Turn “on” the wave(s) that you want to sound. If you want to hear
just a specific wave, turn the other waves “off.”

fig.04-007

In Patch/Sample mode, hold down [SHIFT] and press TONE
SWITCH [1]–[4] to turn each wave on (button’s indicator lit) or off
(indicator not lighted).

The MC-808 lets you use the panel faders to edit a rhythm set.

When you’ve come up with a sound you like, save the rhythm set (p.
95).

fig.04-009

Select the rhythm set that you want to edit (p. 92).

Press [SYNTHESIZER1] or [SYNTHESIZER2].

The faders will automatically move according to the settings of
the rhythm set.

Move the faders to edit the rhythm set.

You can set the patch parameters listed on the following page.

Selecting the rhythm tone to edit

fig.04-013

Hold down [SYNTHESIZER1] or [SYNTHESIZER2] and press a
keyboard pad 1–16 to select the rhythm tone that you want to edit.

Selecting the wave(s) that will sound

Using the faders to edit

MC-808_r_e.book 93 ページ２００７年７月１７日　火曜日　午後５時１分

Содержание MC-808





























































































































































Результаты поиска

Содержание MC-808

Отзывы:

Roland MC-808, Руководство пользователя, Страница: 93 / 156

Результаты поиска

Содержание MC-808

Отзывы: