Roland MC-808 Скачать руководство пользователя страница 83

Страница: 83 / 156

Editing patterns (Pattern Edit)

Pattern mode

If you execute

copy

, that event will be temporarily saved, allowing

you to

paste

it to the desired location.

In the Microscope screen, display the event that you want
to copy.

fig.03-121

Hold down [SHIFT] and press [REC].

The MICROSCOPE UTILITY screen will appear.

Use [CURSOR

] to select “Copy Event” and press

[ENTER] to execute.

fig.03-120

If you execute

copy

, that event will be temporarily saved, allowing

you to

paste

it to the desired location.

In the Microscope screen, display the desired location you

want to paste the copied event.

fig.03-123

Hold down [SHIFT] and press [REC].

The MICROSCOPE UTILITY screen will appear.

Use [CURSOR

] to select “Paste Event” and press

[ENTER] to execute.

fig.03-124

Copying an event (Copy)

Pasting an event (Paste)

MC-808_r_e.book 83 ページ２００７年７月１７日　火曜日　午後５時１分

Содержание MC-808





























































































































































Результаты поиска

Содержание MC-808

Отзывы:

Roland MC-808, Руководство пользователя, Страница: 83 / 156

Результаты поиска

Содержание MC-808

Отзывы: