Roland MC-808 Скачать руководство пользователя страница 46 | Manualshive

Страница: 46 / 156

Roland MC-808 Скачать руководство пользователя страница 46

46

Playing patterns

You can use the MC-808’s eight motorized faders to adjust settings such as volume and pan for each part in real time.

Of course you can also record fader movements into the pattern (p. 65).

fig.03-021

1.

Press [PART LEVEL] so its indicator is lighted.

The faders will automatically move to the current values of the
newly selected parameter.

2.

Press [PART ASSIGN] to select the parts that you want to
edit using the faders.

Indicator unlit:

Parts 1–8

Indicator lit:

Parts 9–16

3.

Move the motorized faders to adjust the volume of each
part.

Raising a fader will increase the volume, and lowering a fader
will decrease the volume.

Range:

0–127

*

When the value is at “100,” the volume will be as specified by the
patch itself.

You can adjust the panning (left/right position) of the sound that is
sent in stereo from the OUTPUT jacks (MIX L/R, DIRECT L/R). For
example you might pan the drums and bass to the center, the piano
to the right, and a synth pad to the left.

fig.03-022

1.

Press [PART PAN] so its indicator is lighted.

The faders will automatically move to the current values of the
newly selected parameter.

2.

Press [PART ASSIGN] to select the parts that you want to
edit using the faders.

Indicator unlit:

Parts 1–8

Indicator lit:

Parts 9–16

3.

Move the motorized faders to adjust the panning of each part.

Raising a fader will pan the sound toward the right.

Lowering a fader will pan the sound toward the left.

Range:

L64–63R

*

When the value is at “0,” the panning will be as specified by the patch
itself.

*

In a patch or rhythm set, there is a pan setting for each tone (rhythm
tone). Adjusting the part pan setting will apply a relative shift to the
panning of the entire patch or rhythm set.

*

For some patches, you may still hear a small amount of sound from the
opposite speaker even if you’ve panned all the way to the far left (or
right). Also, the part pan setting is ignored in the following situations.

• If you’ve made monaural connections

• For a patch, rhythm set, or rhythm tone to which you’ve

applied a monaural-output effects (such as spectrum or
overdrive)

“Applying effects”

Using the motorized faders to edit the pattern settings

Adjusting the volume of each part

(Part Level)

3

1

2

Adjusting the panning of each part

(Part Pan)

3

1

2

MC-808_r_e.book 46 ページ２００７年７月１７日　火曜日　午後５時１分

«
...
44
45
46
47
48
...
»

Содержание MC-808





























































































































































Отзывы:

Нет отзывов