Roland MC-808 Скачать руководство пользователя страница 51 | Manualshive

Страница: 51 / 156

Roland MC-808 Скачать руководство пользователя страница 51

51

Playing patterns

Pattern mode

RPS Hold

You can make a phrase continue playing even after you release your
finger from the keyboard pad.

To hold all phrases

1.

Press [HOLD] so the indicator is lit.

2.

Press a keyboard pad to play a phrase.

You can stop that phrase by pressing the same pad once again.

To hold individual phrases

1.

Hold down [HOLD] and press a keyboard pad to play a
phrase.

[HOLD] will blink, and that phrase will continue playing until
you press the same pad once again.

2.

To play a phrase that you want to hold, hold down [HOLD]
and press the appropriate pad, as described in step

1

.

The phrases will play together.

3.

To play a phrase that you do not want to hold, press only
the appropriate pad.

When you release your finger from the pad, that phrase will
stop playing.

*

In steps 1 and 2, you can also press [HOLD] while pressing the
keyboard pad to play the phrase, as an alternative to holding down
[HOLD] and then pressing the pad.

To stop all phrases, press [HOLD] so the indicator goes out.

RPS Settings

1.

Hold down [SHIFT] and press [RPS].

The RPS setup screen will appear.

fig.03-023

2.

Use [CURSOR

] to select a parameter, and turn the

VALUE dial or use [INC] [DEC] to set the value.

Parameter

Range

Description

RPS
(RPS Set)

01–50

RPS set to edit

RPS Part
(RPS Part)

Part 1–16

RPS part to edit

Pat Bank
(RPS Part Patch
Bank)

Patch assigned to RPS part

Pat
(RPS Part Patch
Number)
Part Output Sel
(RPS Part Out-
put Select)

DRY,
MFX1,
MFX2,
COMP,
DIR,
RHY

How the original sound
of each RPS part will be
output

DRY:

Output to MIX OUT-
PUT jacks without pass-
ing through effects

MFX1 (2):

Output through multi-
effects 1 (or 2)

COMP:

Output through the
compressor

DIR:

Output to DIRECT
OUTPUT jacks without
passing through effects

RHY:

Output according to the
settings of the rhythm
set assigned to the part

RPS Mixer

—

Refer to p. 52.

RPS Trigger Quantize

When using RPS during pattern playback, patterns and phrases
may not play back in precise alignment, depending on the
timing at which you press the keyboard pads. On the MC-808
you can specify the playback timing of the phrase, so it will play
back in precise synchronization with the pattern (

“RPS Trig

MC-808_r_e.book 51 ページ２００７年７月１７日　火曜日　午後５時１分

«
...
49
50
51
52
53
...
»

Содержание MC-808





























































































































































Отзывы:

Нет отзывов