Roland MC-808 Скачать руководство пользователя страница 68

Страница: 68 / 156

Creating an original pattern

About the Timing Scale

Each time you press [SCALE MEASURE], the scale will change in
the following order, letting you select the type of note values to be
entered.

16th notes

fig.03-086.e_70

32nd notes

fig.03-087_70

8th note triplets

fig.03-088_70

16th note triplets

fig.03-089_70

This method lets you enter note messages one at a time.

You can’t use this method to record data other than note messages,
such as control changes from the motorized faders.

Select Step Recording (Step Rec) as described in
“Selecting a recording method” (p. 65).

fig.03-090

Press [ENTER].

You’ll be in step recording standby mode.

Set the recording parameters before you begin recording.

Use [CURSOR

] to select a parameter, and turn the

VALUE dial or use [INC] [DEC] to set the value.

Select the part that you want to record (p. 65).

Press [PLAY] to begin recording.

Now you can record.

Specify the note message that you want to enter.

Use [CURSOR

] to move the cursor, and use the VALUE

dial or [INC] [DEC] to specify the value.

fig.03-091.e

one measure

Keyboard pads [1]–[16] will correspond to a recording input
region of one measure, and you will be able to input notes at
16th note intervals.

one beat

Keyboard pads [1]–[16] will correspond to a recording input
region of two beats, and you will be able to input notes at
32nd note intervals.

one beat

one measure

Keyboard pads [1]–[12] will correspond to a recording input
region of one measure, and you will be able to input notes at
8th note triplet intervals.

one beat

Keyboard pads [1]–[12] will correspond to a recording input
region of two beats, and you will be able to input notes at
16th note triplet intervals.

Consecutively recording notes

one at a time (Step Recording)

Recording procedure

Parameter

Range

Description

Rec Beat

2/4–7/4,
5/8–7/8,
9/8, 12/8,
9/16, 11/16,
13/16,
15/16,
17/16,
19/16

Pattern time signature

* Can be specified only for an

empty pattern.

Rec Measure
Length

1–998

Pattern length

* An already-recorded pat-

tern can be made longer, but
not shorter. To shorten it,
use the pattern edit Delete
Measure (p. 72) to delete
one or more measures.

Rec Velocity

1–127

Volume (velocity) of the
notes that you input from
the keyboard pads.

Location of the note to enter

(measure - beat - tick)

Note Type

Velocity

Gate Time

MC-808_r_e.book 68 ページ２００７年７月１７日　火曜日　午後５時１分

Содержание MC-808





























































































































































Результаты поиска

Содержание MC-808

Отзывы:

Roland MC-808, Руководство пользователя, Страница: 68 / 156

Результаты поиска

Содержание MC-808

Отзывы: