Roland MC-808 Скачать руководство пользователя страница 77 | Manualshive

Страница: 77 / 156

Roland MC-808 Скачать руководство пользователя страница 77

77

Editing patterns (Pattern Edit)

Pattern mode

This operation extracts data of a specific note number from the
specified part, and moves it to a different part. You can use this to
divide a rhythm set into separate parts for each instrument.

*

If the move-source part does not contain any data of the note number
specified by Extract Note, a message of “Cannot Extract!” will appear.

*

If the move-destination part contains no performance data, the setup
parameters (p. 43) of the move-source part will be copied.

*

If the move-destination part does contain performance data, only the
note data will be moved. This means that the note data will be played
using the sound of the patch selected for the move-destination part.

Here you can make settings for each part within the pattern.

You can also use the faders to set the level and pan of each part
(p. 46).

Moving data of a specific note number

to another part (EXTRACT RHY)

Parameter

Range

Description

Source From

Setup,
1–998,
End

first measure of the region to
move data

* If you set this to “SETUP,” the

setup parameters (p. 43) will be
included.

Source End

Setup,
1–998

last measure of the region to
move data
If you set this to “SETUP,” only
the setup parameters will be se-
lected, and no measures will be
included.

Src Part

1–16

Move-source part

Src Note

0 (C-)–127
(G9)

Note number to be moved

Dest Part

1–16

Move-destination part

Setting the part parameters

(PART PARAM)

Parameter

Range

Description

Level
(Part Level)

0–127

Volume of the part

Pan
(Part Pan)

L64–0–63R

Left/right position of the
part

Key Shift
(Part Key
Shift)

-48–+48

Transposition of the part

The pitch will change in
semitone steps over a
range of +/-4 octaves.

Rev Send
(Part Reverb
Send Level)

0–127

Reverb level of the part

When the value is “0,”
the original pitch of the
patch itself will be used
without change.

Output Assign
(Part Output
Assign)

DRY,
MFX1,
MFX2,
COMP,
DIR,
RHY

How the original sound of
each part will be output

DRY:

Output to MIX OUT-

PUT jacks without passing
through effects

MFX1 (2):

Output through

multi-effects 1 (or 2)

COMP:

Output through

the compressor

DIR:

Output to DIRECT

OUTPUT jacks without
passing through effects

RHY:

Output according to

the settings of the rhythm
set assigned to the part

* “RHY” can be set only

when a rhythm set is as-
signed to the part.

Seq Out
(Sequencer
Output As-
sign)

INT,
EXT,
BOTH

Output destination from
the sequencer

INT:

Internal sound gener-

ator

EXT:

MIDI OUT connector

BOTH:

Both of the above

simultaneously

MC-808_r_e.book 77 ページ２００７年７月１７日　火曜日　午後５時１分

«
...
75
76
77
78
79
...
»

Содержание MC-808





























































































































































Отзывы:

Нет отзывов