manualshive.com logo in svg

Roland Fantom-S, Руководство пользователя

Описание продукта: Roland Fantom-S - это удивительный синтезатор с широким спектром функций и возможностей. Владельцы этого устройства могут бесплатно скачать руководство пользователя (Owner's Manual) на manualshive.com и ознакомиться с подробной информацией о его функциях и настройках. Не упустите шанс овладеть этим удивительным инструментом!

Поделиться
Скачать
background image

 

207

 

Expanding the Memory

 

Expanding the Memory

 

The Fantom-S/Fantom-S88 comes with 32 MB of memory into which 
audio samples can be loaded. However, in some cases, 32 MB of 
memory will be insufficient for loading large amounts of data. In 
such a case, you will have to add separately sold memory (DIMM). 
Memory can be expanded up to 64/128/256/512 MB.

Before expanding the memory, consult with your retailer, the nearest 
Roland Service Center, or an authorized Roland distributor.

 

* If a 512 MB DIMM is installed, the result will be the same as if a 256 

MB DIMM were installed (p. 195 SRX/RAM Mode).

 

Precautions for Expanding 

 

Memory

 

901

 

• To avoid the risk of damage to internal components that can be 

caused by static electricity, please carefully observe the following 
whenever you handle the board.

 

1

 

• Before you touch the board, always first grasp a metal object 

(such as a water pipe), so you are sure that any static 
electricity you might have been carrying has been discharged.

 

2

 

• When handling the board, grasp it only by its edges. Avoid 

touching any of the electronic components or connectors.

 

5

 

• Save the bag in which the board was originally shipped, and 

put the board back into it whenever you need to store or 
transport it.

• Use a Philips screwdriver that is suitable for the size of the screw 

(a number 2 screwdriver, Fantom-S only). If an unsuitable screw-
driver is used, the head of the screw may be stripped.

• To remove a screw, rotate the screwdriver counter-clockwise. To 

tighten the screws, rotate the screwdriver clockwise.

 

fig.Screw.e

 

• Be careful that the screws you remove do not drop into the 

interior of the Fantom-S/S88.

• Be careful not to cut your hand on the edge of the cover or the 

opening edge while removing the cover.

 

911

 

• Do not touch any of the printed circuit pathways or connection 

terminals.

 

912

 

• Never use excessive force when installing a circuit board. If it 

doesn’t fit properly on the first attempt, remove the board and try 
again.

 

913

 

• When circuit board installation is complete, double-check your 

work.

 

914 (Modified)

 

• Always turn the unit off and unplug the power cord before 

attempting installation of the memory DIMM board.

 

915 (Modified)

 

• Install only the specified memory DIMM board. Remove only the 

specified screws (p. 207).

 

928

 

• When turning the unit upside-down, get a bunch of newspapers 

or magazines, and place them under the four corners or at both 
ends to prevent damage to the buttons and controls. Also, you 
should try to orient the unit so no buttons or controls get 
damaged.

 

929

 

• When turning the unit upside-down, handle with care to avoid 

dropping it, or allowing it to fall or tip over.

• Do not leave the bottom cover removed. After installation of the 

memory module is complete, be sure to replace the cover.

 

How to Expand the Memory

 

Install the memory module after removing the bottom panel cover.

 

1.

 

Before expanding the memory, turn off the power of the 

Fantom-S/S88 and all connected devices, and disconnect 

all cables, including the Power cable, from the Fantom-S/

S88.

 

2.

 

From the Fantom-S/S88, remove only the screws shown in 

the following diagram, and detach the cover. On the 

Fantom-S, the cover is located on the bottom panel. On the 

Fantom-S88, it is located on the front panel. From the 

Fantom-S/S88, remove only the screws shown in the 

following diagram, and detach the cover.

 

fig.18-02.e

 

* A hex wrench is included with the Fantom-S88. When 

removing screws, you must use this hex wrench.

 

fig.Dimm-05

 

3.

 

Press outward the white clips at either end of the socket 

should be in the downward position.

 

fig.DIMM-01

tighten

loosen

Screws to be removed

Fantom-S : bottom

Fantom-S88 : Panneau avant

Clé hexagonale 5 mm

Vis à enlever

Reference_e.book 207 ページ ２００３年７月１４日　月曜日　午後３時２５分

Содержание Fantom-S





































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Fantom-S

Razer DEATHSTALKER V2 Quick Start Manual preview
DEATHSTALKER V2
Бренд: Razer Страницы: 9
Waeco MagicSpeed MS900 Installation Manual preview
MagicSpeed MS900
Бренд: Waeco Страницы: 120
Audiovox CMT9300 Installation Manual preview
CMT9300
Бренд: Audiovox Страницы: 7
ENERMAX ACRYLUX Datasheet preview
ACRYLUX
Бренд: ENERMAX Страницы: 2
Moog THE SOURCE Instructions preview
THE SOURCE
Бренд: Moog Страницы: 4
Genesis 5901969408287 Quick Installation Manual preview
5901969408287
Бренд: Genesis Страницы: 12
Franklin IC-126 User Manual preview
IC-126
Бренд: Franklin Страницы: 17
Yamaha Keyboard Manual preview
Keyboard
Бренд: Yamaha Страницы: 52
Yamaha KX25 Owner'S Manual preview
KX25
Бренд: Yamaha Страницы: 56
ViewSonic KBM-KP-102 User Manual preview
KBM-KP-102
Бренд: ViewSonic Страницы: 13
BENE 401 Installation Manual preview
401
Бренд: BENE Страницы: 8
Roland DJ-70 Owner'S Manual preview
DJ-70
Бренд: Roland Страницы: 160
ConnectIT CKB-3000-CS User Manual preview
CKB-3000-CS
Бренд: ConnectIT Страницы: 12
Xcellon KBM-ABWS User Manual preview
KBM-ABWS
Бренд: Xcellon Страницы: 12
Qoltec 7993 Installation & User Manual preview
7993
Бренд: Qoltec Страницы: 4
XMetrics XMetrics Quick Start Manual preview
XMetrics
Бренд: XMetrics Страницы: 16
VARMILO VD 65 G -3 Manual preview
VD 65 G -3
Бренд: VARMILO Страницы: 26
Accessory Power ENHANCE GX-K2 User Manual preview
ENHANCE GX-K2
Бренд: Accessory Power Страницы: 24

Бренды по названию

Популярные бренды

Загрузить еще бренды