Roland Fantom-S Скачать руководство пользователя

Страница: 196 / 228

196

Data Management Functions
Reset to Default Factory Settings

(Factory Reset)

Basic Procedure

Press [MENU].

Press

to select “Utility.”

Press [ENTER].

The Utility menu screen will appear.

ffig.17-04_50

Press [1]–[3] to select the operation that you want to

execute.

• [1 (User Backup)] Save user data to a memory card.

• [2 (User Restre)] Load user data from a memory card.

• [3 (Factry Reset)] Restore the factory settings.

Backing Up User Data

(User Backup)

Here’s how all user data in the user area can be saved on a memory

card.

The following user data will be saved.

• Performances

• Patches

• Rhythm sets

• Rhythm Patterns

• Rhythm Groups

• Multisamples

• Songs

• Samples

• Pattern sets

• RPS sets

• Arpeggio styles

• Chord forms

• System settings

* In order to execute User Backup, the memory card must have

approximately 16 MB or more free area.

Insert a memory card into the slot.

In the Utility screen, press [1 (User Backup)].

A message will ask you for confirmation.

To execute the backup, press [8 (Exec)].

* To cancel, press [7 (Cancel)].

Restoring User Data that You

Backed Up (User Restore)

Here’s how user data saved on a memory card by the User Backup

operation can be reloaded back into the user memory of the Fantom-
s.

When you execute User Restore, the current contents of the user area

will be completely erased.

Into the slot, insert the memory card on which user data has

been saved.

In the Utility screen, press [2 (User Restre)].

A message will ask you for confirmation.

To proceed with the restoration, press [8 (Exec)].

* To cancel, press [7 (Cancel)].

When the display indicates “Please Power Off,” turn the

power off, then on again.

Factory Reset

This restores all data in the Fantom-S to the factory-set condition
(

Factory Reset

If there is important data you’ve created that’s stored in the
Fantom-As’s internal memory, all such data is discarded when a
Factory Reset is performed (

the data of the internal user

memory will be lost

). If you want to keep the existing data, save

it on a SmartMedia (p. 168) or save it on via USB to your
computer (p. 184).

Press [MENU] to open the Menu window.

Press

to select “Utility,” and then press [ENTER].

Press [3 (Factry Reset)].

A message will ask confirmation.

Press [8 (Exec)] to execute the Factory Reset.

* To cancel, press [7 (Cancel)].

When the display indicates “Please Power Off,” turn the

power off, then on again.

Reference_e.book 196 ページ２００３年７月１４日　月曜日　午後３時２５分

Содержание Fantom-S





































































































































































































































Результаты поиска

Содержание Fantom-S

Отзывы:

Похожие инструкции для Fantom-S

Бренды по названию

Популярные бренды

Roland Fantom-S, Руководство пользователя

Результаты поиска

Содержание Fantom-S

Отзывы:

Похожие инструкции для Fantom-S

Бренды по названию

Популярные бренды