manualshive.com logo in svg

Roland Fantom-S, Руководство пользователя

Описание продукта: Roland Fantom-S - это удивительный синтезатор с широким спектром функций и возможностей. Владельцы этого устройства могут бесплатно скачать руководство пользователя (Owner's Manual) на manualshive.com и ознакомиться с подробной информацией о его функциях и настройках. Не упустите шанс овладеть этим удивительным инструментом!

Поделиться
Скачать
background image

 

203

 

Installing the Wave Expansion Board

 

Installing the Wave Expansion Board

 

Up to three optional Wave Expansion Boards (one SR-JV80 series, 
two SRX series) can be installed in the Fantom.

Wave Expansion Boards store Wave data, patches, and rhythm sets, 
and by equipping the Fantom-S/Fantom-S88 with these boards, you 
can greatly expand your sound palette.

 

Cautions When Installing an 

 

Wave Expansion Board

 

●

 

To avoid the risk of damage to internal components that can be 
caused by static electricity, please carefully observe the following 
whenever you handle the board.

• Before you touch the board, always first grasp a metal object 

(such as a water pipe), so you are sure that any static electricity 
you might have been carrying has been discharged.

• When handling the board, grasp it only by its edges. Avoid 

touching any of the electronic components or connectors.

• Save the bag in which the board was originally shipped, and put 

the board back into it whenever you need to store or transport it.

 

●

 

Use a Philips screwdriver that is suitable for the size of the screw 
(a number 2 screwdriver, Fantom-s only). If an unsuitable 
screwdriver is used, the head of the screw may be stripped.

 

●

 

To remove a screw, rotate the screwdriver counter-clockwise. To 
tighten the screws, rotate the screwdriver clockwise.

 

fig.18-01.e

 

●

 

When installing Wave Expansion Boards, remove only the 
specified screws.

 

●

 

Be careful that the screws you remove do not drop into the interior 
of the Fantom-S/S88.

 

●

 

Do not leave the bottom cover removed. After installation of the 
Wave Expansion Boards is complete, be sure to replace the cover.

 

●

 

Be careful not to cut your hand on the opening for installing the 
board.

 

●

 

Do not touch any of the printed circuit pathways or connection 
terminals.

 

●

 

Never use excessive force when installing a circuit board. If it 
doesn’t fit properly on the first attempt, remove the board and try 
again.

 

●

 

When circuit board installation is complete, double-check your 
work.

 

●

 

Always turn the unit off and unplug the power cord before 
attempting installation of the circuit board (SRX series).

 

●

 

Install only the specified circuit board(s) (SRX series). Remove 
only the specified screws (p. 203).

 

How to Install a Wave 

 

Expansion Board

 

Install the Wave Expansion Boards after removing the panel cover. 
Boards can be installed in the EXP A–EXP D slots. These slots 
correspond with the Wave Expansion Board groups (XP-A–XP-D) 
when the expansion Wave, patches, and rhythm sets are used.

 

1.

 

Before installing the Wave Expansion Board, turn off the 

power of the Fantom-S/S88 and all connected devices, and 

disconnect all cables, including the Power cable, from the 

Fantom-S/S88.

 

2.

 

From the Fantom-S/Fantom-S88, remove only the screws 

shown in the following diagram, and detach the cover. On 

the Fantom-S, the cover is located on the bottom panel. On 

the Fantom-S88, it is located on the front panel.

 

fig.18-02, 02a.e

 

When turning the unit upside-down, get a bunch of newspapers 
or magazines, and place them under the four corners or at both 
ends to prevent damage to the buttons and controls. Also, you 
should try to orient the unit so no buttons or controls get 
damaged.
When turning the unit upside-down, handle with care to avoid 
dropping it, or allowing it to fall or tip over.

 

fig.18-03

 

A hex wrench is included with the Fantom-S88. When removing 
screws, you must use this hex wrench.

tighten

loosen

Screws to be removed

Fantom-S : bottom

Fantom-S88 : Panneau avant

Clé hexagonale 5 mm

Vis à enlever

Reference_e.book 203 ページ ２００３年７月１４日　月曜日　午後３時２５分

Содержание Fantom-S





































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Fantom-S

Samsung VG-KBD2000 Manual preview
VG-KBD2000
Бренд: Samsung Страницы: 10
Samsung EJ-BT230 Quick Start Manual preview
EJ-BT230
Бренд: Samsung Страницы: 11
Advanced ICE 1296-1 Manual preview
1296-1
Бренд: Advanced ICE Страницы: 4
BTC 9029URF III Quick Installation Manual preview
9029URF III
Бренд: BTC Страницы: 2
Hama 00108392 Operating Instructions Manual preview
00108392
Бренд: Hama Страницы: 15
Ectaco Partner ECS430T User Manual preview
Partner ECS430T
Бренд: Ectaco Страницы: 24
BOW HB022S User Manual preview
HB022S
Бренд: BOW Страницы: 6
Safire SF-KB1005 User Manual preview
SF-KB1005
Бренд: Safire Страницы: 16
Valeo 632201 Instruction Manual preview
632201
Бренд: Valeo Страницы: 76
Alesis QS6 Service Manual preview
QS6
Бренд: Alesis Страницы: 97
Epson SF-710 Ios User'S Manual preview
SF-710
Бренд: Epson Страницы: 40
Epson Runsense SF-810 User Manual preview
Runsense SF-810
Бренд: Epson Страницы: 132
COP-USA AU40M User Manual preview
AU40M
Бренд: COP-USA Страницы: 15
Yamaha PortaSound TYU-40 Owner'S Manual preview
PortaSound TYU-40
Бренд: Yamaha Страницы: 15
Yamaha PortaSound PSS-80 Owner'S Manual preview
PortaSound PSS-80
Бренд: Yamaha Страницы: 16
Yamaha PortaSound PSS-6 Owner'S Manual preview
PortaSound PSS-6
Бренд: Yamaha Страницы: 15
Yamaha Portatone DSR-1000 Owner'S Manual preview
Portatone DSR-1000
Бренд: Yamaha Страницы: 29
Yamaha Portatone DSR-500 Owner'S Manual preview
Portatone DSR-500
Бренд: Yamaha Страницы: 32

Бренды по названию

Популярные бренды

Загрузить еще бренды