Roland Camm-1 Pro GX-300, Руководство пользователя

Страница: 40 / 84

38
Pinch roller (left)
Guide lines
25 mm (1 in.) or more
25 mm (1 in.)
or more
Pinch roller (middle)
Brake
Roll material
Screws
Stopper
Brake
2
Pull out the material from the roll and pass it through
the unit.
Stretch taut, with no slackness.
3
Position the left and right pinch rollers as shown in the figure, and position the middle pinch roller at the center between the
left and right pinch rollers. If a grit mark is present between the left and right pinch rollers, position the middle pinch roller
above the corresponding grit roller.
4
While keeping the material stretched taut, raise the
sheet loading levers to secure the material in place.
When using a material which is narrower than 762 mm
(30 in.), do not lower the middle pinch roller.
5
Position the stoppers so that they lightly touch the
edges of the roll, and secure in place by tightening the
screws.
6
Release the brake.