Roland Camm-1 Pro GX-300, Руководство пользователя, Страница: 23 / 84

21
Material with
a width of
6 in.
6 in.(approx.
152 mm)
12 in. (approx. 305 mm)
18 in. (approx. 457 mm)
24 in. (approx. 610 mm)
30 in. (approx. 762 mm)
* The GX-300 has no middle pinch roller.
* Acceptable material widths
50 to 540 mm (2 in. to
21 in.), 582 to 915 mm
(23 in. to 36 in.)
Material with
a width of
12 in.
: Grit Roller
: Movable Pinch
Roller (Left)
: Movable Pinch
Roller (Right)
Material with
a width of
18 in.
Material with a
width of 24 in.
and 30 in.
and 36 in.
36 in. (approx. 915 mm)
Material
GX-300
Material Loading Position
The right-hand movable pinch roller can be moved within this range.
When loading material with a width other than one indicated above,
move the right-hand movable pinch roller.
* Make sure the pinch rollers are positioned above the grit pattern.
13 mm (1/2 in.) from the edge
of the leftmost grit pattern
37 mm (1-7/16 in.) from the edge
of the Rightmost grit pattern
Separable range
To cut off a piece of material with the separating knife, load the media within the range shown below.
Loading media outside this range may make it impossible to cut off the material with the separating knife.