Cequent Performance Products, Inc.
Plymouth, MI 48170
Technical Service: (888) 521-0510
59798N Rev D 5-26-15
4
Assemble Front Cross Rail:
•
Insert connector tube into left front cross rail and
secure into position using (2) ¼-20 x .250 set
screws.
•
Firmly tighten set screws.
•
Note: Leave approximately 2.0” of connector tube
exposed as shown.
•
Slide right front cross rail onto connector tube and
secure into position using (2) ¼-20 x .250 set
screws.
•
Firmly tighten set screws.
FRONT CROSS RAIL
LEFT HAND
FRONT CROSS RAIL
RIGHT HAND
¼-20 X ¼” SET SCREW
(4) PLACES
CROSS RAIL
CONNECTOR TUBE
5
Attach Front Cross Rail Assembly:
•
Attach front cross rail assembly to side rail assemblies using
(4) ¼-20 x 2-1/2” long hex bolts, (2) bottom clamps, and
(4) locknuts as shown.
•
Note: Attach cross rail assembly with set screws facing
rearward.
•
Firmly tighten all ¼-20 hex bolts.
•
Reinstall locking end caps and lock onto crossbars, 4 places.
•
Double check that all connections are tight.
FRONT CROSS RAIL
ASSEMBLY
¼”-20 HEX NUT
¼-20 X 2-1/2”
HEX BOLT
BOTTOM
CLAMP
SET SCREWS
THIS SIDE
Please read all instructions carefully before assembly, installation and/or use of this product.
59798
TOP RAIL KIT
Printed in China
REINSTALL LOCKING
END CAPS
Page 5 of 6
Product Code:
Product Name:
2.0”
¼” LOCK WASHER
