ROJEK PF 400 S, Инструкция по эксплуатации

Страница: 16 / 35

6.0 Machine positioning
Remove protecting coat from table and other machine parts with a solvent. Do not use petrol
or kindred solvents for this action. They can cut down resistance against corrosion of some
machine parts.
The working space extent depends on machine dimensions, intended working operations
and dimensions of processed material.
Do not forget to let free a big enough space for installment of a sufficiently effective
exhausting unit or hoses connecting with the central exhausting system.
6.1 Working space
It is important to keep a free space of at
least 0,8 m, requested as working
space surrounding the machine.
If a long peace is planed, it is neces-
sary to have a sufficient space in front
of and behind the machine in places of
material in - and output.
6.2 Machine levelling and fixing
If you are sure that placing of the
machine is good, level the machine
by help of forcing-off screws in
machine feet. Use steel washers (part
of delivery) under levelling screws
and balance the machine in plane
with the clearance limit 1 mm/1metre
and screw down machine feet into the
bottom (anchor the machine).
Attached drawing shows a lay-out of
anchoring openings on the machine.