ROJEK PF 400 S, Инструкция по эксплуатации

Страница: 12 / 35

Do not neglect practising of regular inspections in tune
with service manual instructions.
Check up and make sure that nothing troublesome ocurs
on the machine.
- After finishing of work adjust the machine so as to be ready for following operations.
- In case of mains outage – switch off immediately main switch or tow plug out from socket.
- Do not overpaint, mear, damage, do up nor get off safety shields. If they get unreadable or
lost – contact production plant and renew them.
4.3 Working dress and personal safety
Experience shows that various personally worn objects e.g.
finger rings, watches, wristbands and the like used to cause
injuries. Hence put them away before beginning of work,
fasten sleeves, remove tie – those could be caught by
various parts of working machines. Brace your hair so as not
to fly free and wear suitable shoes recommended or rated by working safety rules of a
country in question.
- Wear safety outfit (glasses, apron, safety footwear and the like).
- In case of obstacles above your head in working space – wear a helmet.
- Wear always a protecting mask during planing material – source of dust (when planed).
- Never wear free working dress.
- Never work on the machine under influence of drugs or spirit drinks.
- If you suffer from stuggers, fade or swoon – do not work on the machine.
4.4 Safety regulations for machine operator
Do not start up the machine before having got up the content
of this manual.
- Check up whether electric cabels are not damaged so as an electric current fading would
not cause an injury (electric shock).
- Check up regularly whether safety coverings are properly mounted and if they are unda-
maged. Damaged coverings repair immediately or replace with other ones.
- Do not start the machine with removed protecting covering.
- Never use deformed or cracked tools.
- Replace blunt tools as soon as possible, for blunt tools often cause injuries or damages .
- Never use tools at higher speed than recommended by its producer.
- Stop all machine functions before replacing of tools.
- Do not remove nor in any else interfer to safety elements like coverings, limit switches,
nor practise its mutual blockage.
- Require an assistance for manipulation with parts exceeding your abilities.
- At a storm we recommend : Do
NOT operate at the machine !