Rohm DURO-A, Перевод оригинального руководства по эксплуатации

Страница: 30 / 52

5 | Assembly
30 / 52 Power Chuck DURO-A
ID no. Size of
spindle
head Chuck size h [mm] F [mm] D [mm]
174525
1)
4 110 25 82.6 60
174526
1)
4 135 18 82.6 115
145125
1)
4 165 18 82.6 140
174527 5 135 32 104.8 115
174528 5 165 21 104.8 140
145127 5 210 21 104.8 170
145129 6 165 35 133.4 140
174529 6 210/254 27 133.4 170
145131 6 254 27 133.4 220
145135 8 210 39 171.4 170
174530 8 254/315 39 171.4 220
145143 11 254 48 235 220
174531 11 315 36 235 300
145147 11 400 40 235 380
174532 15 400 50 330.2 380
1)
DIN 55021 upon request.
All attachment parts are included.
5.4 Assembly of power chuck on machine spindle or intermediate flange
▪ The machine is switched off and protected against being switched on
again.
▪ The machine spindle or intermediate flange is clean.
▪ The machine spindle head or finished intermediate flange has been
checked for radial and axial run-out.