Rohm DURO-A, Перевод оригинального руководства по эксплуатации

Страница: 28 / 52

5 | Assembly
28 / 52 Power Chuck DURO-A
b) With thread:
S
6/1
7
6
6/1
1. Insert the special threaded ring/adapter with thread (6/1) for the corres-
ponding draw connection (machine) into the threaded ring (6) and
tighten.
Ø
A groove, flat or borehole is usually fitted on the circumference (S) to
hold it.
2. Carry out assembly as described in Chapter Assembly of power
chuck on machine spindle or intermediate flange [
}
30] .
Alternatively:
1. Previously mount the special threaded ring/adapter with thread (6/1) for
the corresponding draw connection (machine) onto the draw tube.
2. Carry out assembly as described in Chapter Assembly of power
chuck on machine spindle or intermediate flange [ } 30] .
Threaded rings
For this purpose, RÖHM GmbH offers neutral threaded rings:
Threaded rings with thread
(up to size 210) Threaded ring with collar
(from size 245)
max. thread size
max. thread size
max. thread length