Operating Concepts
R&S
®
NRP-Zxx
27
Getting Started 1176.8822.02 ─ 03
Starting a measurement
1. Connect the power sensor to the PC as shown in
.
2. On the PC, start the R&S NRPV software.
3. Connect the power sensor to the PC. For a detailed description, see
4. If you use the power sensor for the first time with the R&S NRPV software, activate
the sensor using a license key:
a) In the "File" menu, select "File"
> "Licensing".
The "Licensing NRP-Z Power Sensors for NRPV" dialog opens.
b) Select your power sensor.
c) Select "Enter License".
The "License Activation" dialog opens.
d) Enter the license key either manually or with the key code file.
e) Confirm with "OK" to return to the "Licensing NRP-Z Power Sensors for NRPV"
dialog. The dialog indicates all currently connected sensors.
Note:
If you want to evaluate the R&S NRPV before buying a license for your
power sensor, you can activate a sensor for temporary use. To do so, select "Eval-
uate Without License" in the "Licensing NRP-Z Power Sensors for NRPV" dialog.
For a detailed description, refer to the operating manual of the R&S NRPV.
5. Switch on the test signal of the signal source.
6. To start a continuous measurement, select "Measure"
> "Continuous".
The "Continuous" measurement window appears. It shows the measurement
results numerically, and the control panel for accessing further dialogs with param-
eters for measurement, evaluation and display.
R&S NRPV
