Preparing for Use
R&S
®
NRP-Zxx
11
Getting Started 1176.8822.02 ─ 03
4.2 Unpacking and Checking the Power Sensor
Check the equipment for completeness using the delivery note and the accessory lists
for the various items. Check the power sensor for any damage. If there is damage,
immediately contact the carrier who delivered the instrument. Make sure not to discard
the box and packing material.
Packing material and transportation
Always make sure that sufficient mechanical and electrostatic protection is provided
when transporting the power sensors.
4.3 Connectors of the R&S NRP
‑
Z Power Sensors
An R&S NRP
‑
Z power sensor has two connectors, as shown in
.
Figure 4-1: Connectors of an R&S NRP
‑
Z power sensor
1 = Host connector
2 = RF connector
Connectors of the R&S NRP
‑
Z Power Sensors
