Noise-Limited OTA Performance in Transmit Diversity Mode
R&S
®
AMS32-K31
10
User Manual 1175.6678.02 ─ 01
2.1.2.1
Hardware Setup Selection
In the "General Settings" dialog, you can select your previously configured hardware
setup (see
chapter 2.1.1, "Hardware Setup"
Access:
"General Settings" button in the "OTA Auto Test Template" dialog; see
In general, you will have to select your "Hardware Setup" and specify the "Mobile Phone
Network" (LTE-FDD or TD-LTE). Click "OK" to confirm your settings and return to the
"OTA Auto Test Template" dialog. The contents of this dialog change as shown below.
Fig. 2-4: OTA Auto Test Template dialog for a MIMO OTA test
Configuration
