Noise-Limited OTA Performance in Transmit Diversity Mode
R&S
®
AMS32-K31
9
User Manual 1175.6678.02 ─ 01
2.1.2 OTA Test Template
In the "OTA Auto Test Template" dialog, you can configure your MIMO OTA test and
store your settings to a template file which you may use repeatedly.
Access:
"File > Test Template Open/New..." in the R&S AMS32 main dialog window
(keyboard shortcut "Ctrl+E") or "EMC32 Explorer > Open Test Template". In the "Hard-
ware Setup Open" dialog opened, select "New > OTA Auto Test" and click "OK".
Select your "OTA Test Method: Sensitivity Mobile Phone" as shown below.
Fig. 2-3: OTA Auto Test Template dialog (default configuration)
For a new single-antenna MIMO OTA test, you may typically have to open the "General
Settings" dialog to select your hardware setup and adjust the "Communication Set-
tings". After performing your configurations, click "OK" to save your test to a file with an
appropriate name.
Configuration
