manualshive.com logo in svg

Rohde & Schwarz CMW-KM645, Руководство пользователя

Поделиться
Скачать
Rohde & Schwarz CMW-KM645 Скачать руководство пользователя страница 29

Programming

R&S

®

CMW-KM645

29

User Manual 1173.9740.02 ─ 04

CONFigure:FMSTereo:MEAS:RFSettings:EATTenuation 2
CONFigure:FMSTereo:MEAS:RFSettings:FREQuency 98.2E+6
CONFigure:FMSTereo:MEAS:RFSettings:ENPower -5
CONFigure:FMSTereo:MEAS:RFSettings:UMARgin 0
CONFigure:FMSTereo:MEAS:RFSettings:FOFFset 1000
CONFigure:FMSTereo:MEAS:RFSettings:MLOFfset 6

5.3 Specifying Measurement Control Settings

// *****************************************************************************
// Define stop condition (stop on limit failure) and error handling,
// select a statistic count of 30 packets, enable all measurement results.
// *****************************************************************************
CONFigure:FMSTereo:MEAS:SCONdition SLFail
CONFigure:FMSTereo:MEAS:MOEXception ON
CONFigure:FMSTereo:MEAS:MEValuation:SCOunt:RFCarrier 30
CONFigure:FMSTereo:MEAS:MEValuation:SCOunt:RFModulation 30
CONFigure:FMSTereo:MEAS:MEValuation:SCOunt:AF 30
CONFigure:FMSTereo:MEAS:MEValuation:RESult:RFSCalars ON
CONFigure:FMSTereo:MEAS:MEValuation:RESult:AFSCalars ON

5.4 Specifying Limits

// *****************************************************************************
// Define limits and enable limit check for all results
// *****************************************************************************
CONFigure:FMSTereo:MEAS:MEV:LIMit:RFCarrier -35,-25,960,76000,192,ON,ON,ON,ON 
CONFigure:FMSTereo:MEAS:MEV:LIMit:RFModulation 7000,2000,68500,3,ON,ON,ON,ON
CONFigure:FMSTereo:MEAS:MEV:LIMit:AFLeft 48000,48000,0.5,0.5,54,ON,ON,ON,ON,ON 
CONFigure:FMSTereo:MEAS:MEV:LIMit:AFRight 48000,48000,0.5,0.5,54,ON,ON,ON,ON,ON

5.5 Performing Single Shot RF Measurements

// *****************************************************************************
// Start single-shot measurement and return average RF Carrier results. 
// *****************************************************************************
READ:FMSTereo:MEAS:MEValuation:RFCarrier:AVERage?

// *****************************************************************************
// Return standard deviation and RF Modulation results without repeating
// the measurement.
// *****************************************************************************
FETCh:FMSTereo:MEAS:MEValuation:RFCarrier:SDEViation?
FETCh:FMSTereo:MEAS:MEValuation:RFModulation:AVERage?

 

 

 

Specifying Measurement Control Settings

深圳德标仪器 

135-1095-0799

Содержание CMW-KM645


































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды