Rohde & Schwarz CLIPSTER 6 Mk2, Руководство пользователя

Страница: 10 / 78

Safety and Regulatory Information
Safety Instructions
CLIPSTER
10
User Manual (Hardware) | 2904.4460.02 - 04
●
The plug on the power supply cord is used as the main disconnect
device. Ensure that the socket outlets are located near the equipment
and are easily accessible.
●
A safe electrical earth connection must be provided to the power supply
cords. Check the grounding of the casing before applying power.
●
Provide a suitable power source with electrical overload protection to
meet the requirements laid down in the technical specification.
●
Before switching on the product, ensure that the voltage and frequency
indicated on the product match the available power source. If the power
adapter does not adjust automatically, set the correct value and check
the rating of the fuse.
●
If a product has an exchangeable fuse, its type and characteristics are
indicated next to the fuse holder. Before changing the fuse, switch off the
instrument and disconnect it from the power source. How to change the
fuse is described in the product documentation.
●
Only use the power cable delivered with the product. It complies with
country-specific safety requirements. Only insert the plug into an outlet
with protective conductor terminal.
●
Only use intact cables and route them carefully so that they cannot be
damaged. Check the power cables regularly to ensure that they are
undamaged. Also ensure that nobody can trip over loose cables.
●
If the product needs an external power supply, use the power supply that
is delivered with the product or that is recommended in the product docu-
mentation or a power supply that conforms to the country-specific regula-
tions.
●
Ensure that you can disconnect the product from the power source at
any time. Pull the power plug to disconnect the product. The power plug
must be easily accessible. If the product is integrated into a system that
does not meet these requirements, provide an easily accessible circuit
breaker at the system level.
Cleaning the Product
Use a dry, lint-free cloth to clean the product. When cleaning, keep in mind
that the casing is not waterproof. Do not use liquid cleaning agents.
Connecting to a Network
Before connecting the product to a local area network (LAN), consider the
following:
●
Always install the latest firmware for the components of your system to
reduce security risks.
●
For Internet or remote access, use secured connections if applicable,
such as HTTPS, SFTP, FTPS instead of HTTP, FTP.
●
Ensure that the network settings comply with the security policies of your
company. Contact your local system administrator or IT department
before connecting your product to your company network.