manualshive.com logo in svg

Rohde & Schwarz 1312.8000K08, Начало работы

Поделиться
Скачать
Rohde & Schwarz 1312.8000K08 Скачать руководство пользователя страница 89

Operating the Instrument

R&S

®

FSW

89

Getting Started 1338.4102.02 ─ 08

"Ext. Gen"

<

"NOR"

 |

"APX"

>

The R&S

 

FSW is controlling an external generator (requires option R&S

 

FSW-

B10).

NOR

: the measurements are normalized with the results of the external gener-

ator calibration

APX

 (approximation): the measurements are normalized with the results of the

external generator calibration; however, the measurement settings have been

changed since calibration
If neither label is displayed, no calibration has been performed yet or normali-

zation is not active.
For details, see the "External Generator Control" section in the R&S

 

FSW User

Manual.

"LVL"

A level offset is applied to the external generator signal (only if external genera-

tor control is active).

"Inp: Input 2"

For R&S

 

FSW85 models with two RF input connectors only: the second input

connector "RF2" is the current input source for the channel

"B2000"

A connected oscilloscope is being used to acquire data with up to 2

 

GHz band-

width (requires bandwidth extension option R&S

 

FSW-B2000)

"B5000"

A connected oscilloscope is being used to acquire data with up to 5

 

GHz band-

width (requires bandwidth extension option R&S

 

FSW-B5000)

Changing the Channel Name

The measurement channels are labeled with their default name. If that name
already exists, a sequential number is added. You can change the name of the
measurement channel by double-tapping the name in the channel bar and enter-
ing a new name.

Note: 

Channel name restrictions. Channel names can have a maximum of 31

characters, and must be compatible with the Windows conventions for file names.
In particular, they must not contain special characters such as ":", "*", "?".

7.1.2

 

Window Title Bar

Each channel in the R&S

 

FSW display can contain several windows. Each win-

dow can display either a graph or a table as a result of the channel measurement.
Which type of result evaluation is displayed in which window is defined in the dis-
play configuration (see 

Chapter 7.6, "Displaying Results"

, 

on page 108). The win-

dow title bar indicates which type of evaluation is displayed.

Understanding the Display Information

Содержание 1312.8000K08




























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды