Instrument Tour
R&S
®
FSW
47
Getting Started 1338.4102.02 ─ 08
5.1.14
PHONES and VOLUME
You can use headphones to monitor demodulated audio frequencies in time
domain measurements acoustically.
Connect headphones equipped with a miniature jack plug to the PHONES female
connector. Set the output voltage using the "Volume" control to the right of the
female connector. The maximum output voltage (volume) is 1
V. If a headphone is
plugged into the instrument, the internal loudspeaker is automatically switched
off.
The output provided to the PHONES connector is the same as the (video) output
at the
See also
5.1.15
SYSTEM Keys
[SYSTEM] keys set the instrument to a predefined state, change basic settings,
and provide print and display functions.
A detailed description of the corresponding functions is provided in the User Man-
ual.
Table 5-3: SYSTEM keys
SYSTEM key
Assigned functions
[PRESET]
Resets the instrument to the default state.
[MODE]
Provides the selection between applications
[SETUP]
Provides basic instrument configuration functions, e.g.:
●
Reference frequency (external/internal), noise source
●
Date, time, display configuration
●
LAN interface
●
Self-alignment
●
Firmware update and enabling of options
●
Information about instrument configuration incl. firmware ver-
sion and system error messages
●
Service support functions (self-test etc.)
Switches between the on-screen keyboard display:
●
At the top of the screen
●
At the bottom of the screen
●
Off
Front Panel View
