Operating the Instrument
R&S
®
FSW
102
Getting Started 1338.4102.02 ─ 08
3. If the parameter does not require a unit, confirm the entered value by pressing
the [ENTER] key or any of the unit keys.
The editing line is highlighted to confirm the entry.
Digit-based data entry
By default, when you enter a numeric value in an input field, you overwrite the
existing value. If you edit the value using the arrow keys or rotary knob, the value
is increased or decreased linearly. An extended digit-based data entry mode
allows you to edit individual digits and change the unit quickly.
1. In the input field for a numeric value, select the pencil icon to switch to exten-
ded data entry mode.
2. Use the left and right arrow keys to scroll through the individual digits of the
indicated value.
3. Change the required digit using the up and down arrow keys or the rotary
knob to scroll through the values 0 to 9.
The new value is applied immediately, without further confirmation.
Note:
● If you enter a digit using the keypad, the entire value is overwritten, as in
normal data entry mode.
● To add a digit to the existing value, you must return to normal data entry
mode. Select the pencil icon to toggle between entry modes.
4. To change the unit:
a) Press the right arrow key and scroll past the last digit to select the unit list.
b) Use the up and down arrow keys to scroll through the available units.
c) Press the left arrow key to return to the last digit of the numeric value.
The new unit is applied immediately, without further confirmation.
5. Select the "X" to close the input field.
Entering Data
