manualshive.com logo in svg

Rohde & Schwarz 1311.6010.22, Руководство пользователя

Поделиться
Скачать
Rohde & Schwarz 1311.6010.22 Скачать руководство пользователя страница 429

GUI Reference

R&S

®

 ZNB/ZNBT

429

User Manual 1173.9163.02 ─ 53

Access:

 

Calibration Unit Wizard (MultiCal)

, Step 1: "Ports" > "Add..." / "Modify..."

●

The "Multiple Cal in Calibration Wizard" (MultiCal) feature is disabled by default
and has to be activated in the 

Calibration Tab

 of the "System Config" dialog.

●

For background information on calibration types, see 

Chapter 5.5.1, "Calibration

Types"

, 

on page 149.

The layout of the main panel depends on the number of test ports available.

Figure 6-16: Define Calibration dialog (MultiCal, > 4 test ports)

Ports

Selects the test ports to be calibrated.

Note: 

Calibration and port de-/activation.

The way the analyzer fimware activates/deactivates ports after a successfull calibration
(system error correction or power calibration) has slightly changed:

●

In all FW releases, calibrated ports that were previously disabled, are automatically
enabled as single-ended logical ports.

●

Starting with FW version 2.10, uncalibrated ports were disabled in the related
channel(s). If only one of the physical ports forming a balanced port was calibrated,
the balanced port was dissolved and only the uncalibrated (single-ended) port was
disabled.
In earlier FW versions there was no such port deactivation mechanism.

●

Since FW version 2.40 an uncalibrated port is only disabled if it is not used by a
measurement, i.e. if it is not required by any trace of the related channel.

Remote command: 
The port parameters in many calibration commands define the calibrated ports.

Cal Softtool

Содержание 1311.6010.22












































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды