RFT1000 in RACS 5 User Manual.doc
2017-10-05
3/13
1.
I
NTRODUCTION
This manual contains minimum information that is necessary to properly install and configure
RFT1000 readers in RACS 5 access control system. Additional information on RACS 5 configuration
can be found in the Application Note AN006 RAC 5 Quick Start Guide which is available at
. The application of RFT1000 reader in RACS 4 and third party systems is described in
dedicated documents which are also available at
2.
D
ESCRIPTION AND
S
PECIFICATION
RFT1000 biometric reader operates as access control terminal and/or Time&Attendance terminal in
RACS 5 system. RFT1000 is equipped with fingerprint scanner and Mifare Ultraligth/Classic/Plus/
DESFire proximity card reader. Users can be identified by comparison of their fingerprints with
fingerprint templates recorded in reader’s memory (1:N mode) or by comparison of their
fingerprints with fingerprint templates recorded in Mifare card memory (1:1 mode). The reader is
not a standalone device and it must be connected to MC16 controller. The communication in
LAN/WAN is encrypted with AES128 CBC method.
Fig. 1 The example of RFT1000 operation with MC16-PAC-1-KIT
Table 1. Specification
Maximum
number
of
fingerprint templates
1900
Fingerprint
identification
modes
1:N mode – fingerprint templates are recorded in reader memory
1:1 mode – fingerprint templates are recorded on Mifare cards
