RFT1000 in RACS 5 User Manual.doc
2017-10-05
8/13
Fig. 6 Select device window in RogerVDM software
7.
In the opened window which can also be accessed selecting
Configuration
command in top
menu of RogerVDM software, enter such communication parameters as
IP address
,
IP Port
,
Default Gate
and
Subnet mask
.
8.
Additionally define your communication password for securing and encrypting the
communication with the reader.
9.
Select the option
[2] RS485 EPSO3
in
Communication protocol
field and in the area
RS485
EPSO3 protocol settings
below in
Address
field assign unoccupied address to RFT1000 on RS485
bus of MC16 access controller in range of 100..115.
10.
Upload settings to the reader with
Send to Device
button.
4.1.2 Recognition modes
In case of RFT1000 it is necessary to select one of following recognition modes:
1:N mode (templates in reader’s memory) – in this mode, fingerprint templates are recorded in
memory (database) of RFT1000 reader. Users are identified by comparison of their fingerprints
with fingerprint templates recorded in reader memory.
1:1 mode (templates on Mifare cards) – in this mode, fingerprint templates are recorded only on
Mifare cards and not in reader’s memory. Users are identified by comparison of their fingerprints
with fingerprint templates recorded in memory of Mifare card.
