background image

EN

Code

Description

1

Carbon steel barrier assembly cabinet with anti-corrosion 
treatment, painted.

2

Aluminium boom support base, die-cast, with anti-corrosion 
treatment, painted.

3

JNT/BA/128

Internal connection joint made of anodized aluminium.
n. 2 connection joints are mandatory.

4

BA/128/4

Boom L 4,1 m made of aluminium, with slot cover profiles and 
shockproof rubber.

5

Zinc coated steel boom fastening bracket

6

Aluminium boom fixing cover, die-cast, with anti-corrosion 
treatment, painted.

7

Head in die-cast aluminium with anti-corrosion treatment and 
painted, complete with diffuser in transparent polycarbonate 
and BI/BLED/8 led lights.

8

CTRL

Digital control unit 

9

Mechanical stop in opening and closing.

10

Galvanized steel springs fixing arm.

11

Geared motor complete with brushless motor and absolute 
encoder.

12

SP/85/AS/02

2 Ø85 springs for booms up to 8 m.

13

Corrosion-resistant steel closing door, with anti-corrosion 
treatment, painted.

14

KT244

Galvanised foundation plate for securing the barrier.

15

BAFS/01

Fixed support with rubber, NOT-adjustable.

10  REFERENCES AND ACCESSORIES

Code

Description

16

BAFS/03

Fixed support with rubber, NOT-adjustable, with provision 
of a bolt.

17

BAFS/02

Fixed support with rubber, adjustable, telescopic.

18

BAFS/04

Fixed support with rubber, adjustable, telescopic, with 
provision of a bolt.

19

BAFS/05

Fixed end rest with rubber, adjustable, telescopic with rubber 
buffer and integrated magnet.

20

KT231

Fixed support foundation plate.

21

BAMS/01

Mobile support for boom.

22

BAMS/01/EXT

Extension for mobile support

23

BI/BAT/KIT

Emergency battery kit complete with battery charger and wi-
ring (optional).

24

BI/BCHP

Battery charge board complete with wiring (optional)

25

KT239

DIN Bar

26

KT242

Magnetic cable passage kit

27

ALED8C

Strip LED 8 metres with connections cable.

28

R99/BASB40

Pack of No. 40 reflective adhesive strips for the boom.

29

BARK/02

Painted aluminium rack in 2 metres modules.

30

RS/GR1/100

Lithium grease (EP LITIO).

7

8

9

10

11

12

14

13

R

TECHNOL

OG

Y

ROGER

R

TEC

HNOL

OG

Y

ROGE

R

R

TECHNOL

OG

Y

ROGER

3

12

15 16

17 18

19

21

22

23

24

25

26

27

28

29

30

20

4

10

11

12

1

2

4

5

6

3

3

4

Содержание BI/008






















Отзывы:

Похожие инструкции для BI/008