Rofin PowerLine E Air 10, Руководство по обслуживанию и интеграции

Страница: 57 / 78

Integrating the laser system
PowerLine E Air 47
4.3.3.9 Reset emergency stop relay
4.4 Assignment of the -X28 intergration interface
The interface -X28 (D-Sub 15) is available on request.
4.5 Assignment of the -X42 integration interface
The 24V voltage is connected when the laser system is switched on (main switch in position I ) and
is not controlled by the emergency stop function. The voltage can function with max. 0.5A.
4.6 Assignment of the -X42a integration interface
4.6.1 Plug -X42a D-Sub 37 male
The voltage 24V DC [2L+] is controlled by the emergency stop function and is equipped with the F2
fuse.
The voltage is only available for the signal inputs of the laser system.
Note
3
The figures provided in brackets show the start location or the destination of the signal on the emer-
gency stop relay.
A button can be integrated into this circuit to start
the emergency stop relay (Reset).
Contact
no. Function
1 24V DC control voltage [L+]
2 GND 24V control voltage
-X46 : 5
-X46 : 6
S34
S33
1
-X42
2
Contact
no. Signal direction Function
1 Output (S12) Emergency stop push button channel 1
2 Input (S12) Emergency stop push button channel 1
3 Output (S12) Emergency stop push button channel 1
4 Input (S11) Emergency stop push button channel 1
5 Output (S22) Emergency stop push button channel 2