Rofin PowerLine E Air 10, Руководство по обслуживанию и интеграции

Страница: 47 / 78

Integrating the laser system
PowerLine E Air 37
1
Attention
Effective as of VLM marking software version 4.4:
4.2.4 Digital inputs laser control
Target value: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24V DC
Contact: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . relay contact / optocoupler
Signal logical 1 corresponds to: . . . . . . . . . . . . . . . . . . . . . . . . . . . . +24V DC (+13 ... +30V)
Signal logical 0 corresponds to: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0V DC (-30 ... +5V)
Current consumption at +24V: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . < 6.5 mA
Max. input voltage: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +30V DC
4.2.4.1 Laser ON/OFF
4.2.4.2 Shutter
Opening the shutter
7 Bit M-functions are available:
–
Bit 9 on -X42b
– Bit 10 to 15 on -XC3a
-X42b:
-XC3a:
-XC3a:
-XC3a:
-XC3a:
-XC3a:
-XC3a:
n=
2
9
10
11
12
13
14
Bit 9
Bit 10
Bit 11
Bit 12
Bit 13
Bit 14
Bit 15
The laser system can be switched on by remote
control via an isolated contact if the main switch
has been set to position
I and the key switch is in
position II . Please pay special attention to poten-
tial separation. Before doing this, the emergency
stop relay of the laser system must be set (Reset).
The shutter can only be opened if the input "Shut-
ter Enabled" is operated. Please pay special at-
tention to potential separation.
1
Attention
This signal circuit must not be used as a shutter in-
terlock.
-X42a : 18
-X42a : 16
+24V
-X42a : 20
-X42a : 17
+24V