Rofin PowerLine E Air 10, Руководство по обслуживанию и интеграции

Страница: 44 / 78

Integrating the laser system
34 PowerLine E Air
4.2.2.2 Marking stop
4.2.2.3 External Error
4.2.2.4 Acknowledge PC error
4.2.2.5 PC shut down
4.2.2.6 M-function
This signal cancels a running marking program
or marking job.
This signal input is also available on -X46 (see
Section "4.3, External control panel -X46" on
page 43).
This signal currently has no function.
This signal currently has no function.
This signal input is also available on -X46 (see
Section "4.3, External control panel -X46" on
page 43).
This signal closes all open programs, shuts down
the software and sets the PC into standby mode.
This signal input is also available on -X46 (see
Section "4.3, External control panel -X46" on
page 43).
M-function inputs can be read by the VLM or
VMC2 marking program. They serve to control
functions within the marking program. The sig-
nals are distributed to two plug connectors.
3
Note
See VLM manual or VMC2 software description.
-X42b : 7
-X42b : 22
-X42b : 8
+24V
-X42b : 7
-X42b : 14
-X42b : 8
+24V
-X42b : 7
-X42b : 23
-X42b : 8
+24V
-X42b : 7
-X42b : 10
-X42b : 8
+24V
X42b : 7
-X42b : n
-X42b : 8
+24V
-XC3a : 15
-X3a : n
-XC3a : 7
+24V