Rofin PowerLine E Air 10, Руководство по обслуживанию и интеграции

Страница: 55 / 78

Integrating the laser system
PowerLine E Air 45
4.3.3 Digital outputs laser control
Target value: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24V DC
Signal logical 1 corresponds to: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .+24V (+20 ... +30V)
Signal logical 0 corresponds to: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0V @ R
load
≤
100 k
Ω
Max. load: (transistor output). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 mA
Short-circuit proof. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . yes
4.3.3.1 Laser radiation possible
4.3.3.2 Power supply ON
4.3.3.3 Shutter closed
This output will be set approx. 6 seconds before
the laser beam can be generated and remains in
set condition while the laser beam is being gene-
rated. If the laser is operated in laser class IV or
IIIB, this signal shows the operator that a laser
beam can be generated or emitted.
3
Note
Refer to the relevant regulations (EN 60825-1 in
the currently applicable version, or CDRH
1040.10 (f)(5)).
3
Note
See also the 'Main components' chapter, section
"Laser radiation warning lamps" in the Opera-
tor’s Manual of the laser system.
3
Note
See also the 'Operating status and fault displays'
chapter in the Operator’s Manual of the laser sys-
tem.
This output is set if the main switch of the laser sys-
tem is switched on and the mains voltage is con-
nected.
This output is set if the shutter is safely closed and
the laser is ready for operation.
-X46 : 11
-X46 : 15
-X46 : 16
+24V
-X46 : 11
-X46 : 16
+24V
0V24
-X46 : 11
-X46 : 12
-X46 : 16
+24V