Rodgers Trillium T787, Руководство пользователя

Страница: 38 / 100

27
Melody and Bass Couplers
These controls provide great flexibility. The Melody Coupler allows you to use a different
registration for the top note played on the Great so that you can accentuate the melody note even
though both hands are on one manual. When
MEL is activated, the top note on the Great will
use the Swell registration.
The Bass Coupler is similar in concept, except that when it is activated (i.e., the BASS tab is lit),
the bottom note played on the Great will use the registration from the Pedal division. This
allows you to easily add a Pedal part to a piece of music which is played only on the Great
manual.
Normally, the Melody Coupler operates over a very specific range from key 25 to key 61 on the
Great manual. However, the bottom note of the range for each coupler can be moved, if desired.
Likewise, the range of the Bass Coupler normally at key 1 and extends to key 25 on the Great
manual; the top note of its range may be changed.
Setting Range of the Melody Coupler
To change the range of a Melody Coupler:
1. Press and hold the SET piston, then press MEL . The Melody Coupler will begin
flashing.
2. Release both controls.
3. While the Melody Coupler continues to flash, press a key on the Great manual
corresponding to the lowest note of the new range. Any note from key 13 to key
49 may be selected. After the selected key has been pressed, the Melody Coupler
turns off.
Setting Range of Bass Coupler
To change the range of the Bass Coupler:
1. Press and hold the SET piston, then press BASS , which begins flashing.
2. Release both controls.
3. While BASS is flashing, press a key on the Great manual that corresponds to the
highest note the range is to extend. Any note from key 1 to key 32 may be
selected. After the selected key has been pressed, the Bass Coupler turns off.
Note: When a key is pressed to set the range, no sound is heard even if stops are on,
so no disturbance is made if programming during a performance.
The new range of these couplers is remembered when the organ is powered off.
!