Rodgers Trillium T787, Руководство пользователя

Страница: 44 / 100

33
Storing Additional Settings on a SmartCard
Several additional settings can also be stored on a SmartCard. Changing any of these settings
causes all of them to be moved to the card (if, of course, they were not previously stored on
the card). The settings stored on the SmartCard automatically take effect when the card is
inserted. The settings stored on the SmartCard are:
Melody Note Range Master Tuning Lock Status
Bass Note Range Tremulant Adjustments
Wind Stabilizer status Console Lamp Intensity
Shutter Thickness MIDI Stop Change Send/Receive Enable
Voice Palette selections
Deleting Settings from a SmartCard
To delete these additional settings from a SmartCard:
1. Press and hold General Cancel (‘ 0 ’), then press SET momentarily. A message
appears in the Console Display indicating the settings have been deleted from the
Card.
Deleting a Memory Level from a SmartCard
To delete a memory level from a SmartCard:
1. Hold General Cancel (‘ 0 ’) and press the corresponding piston for the memory
level to be deleted ( M1 , M2 , M3 or M4 ).
2. A message appears in the display confirming the memory level has been deleted
from the SmartCard.
Using your SmartCard on Other Rodgers Organs
The same SmartCard can be used in more than one Rodgers organ equipped with the
SmartCard feature. The information on the SmartCard is kept separate for each organ model.
If a folder is created on a particular model, that folder is accessible only on that same model
of Rodgers organ. A SmartCard can hold sets of folders for several Rodgers organ models.
When a SmartCard is inserted into a console slot, any folders created on that same model are
available.
It is important to remember, although folders created on one model are invisible on another
model, these folders reduce the amount of free memory space on the card.
Once a memory level has been deleted from the SmartCard, the corresponding
internal memory level immediately becomes active.
!