Rodgers Trillium T787, Руководство пользователя

Страница: 19 / 100

8
Setting a Piston
The Rodgers T787 is equipped with factory registrations, each of which can be used for a
wide variety of wonderful musical effects. However, the contents of any piston can be easily
changed to suit your particular needs.
To set a new registration on a piston:
1. Select the desired stops, couplers and MIDI settings.
2. Press and hold the SET piston, located on the left hand side under the Great
manual.
3. While continuing to hold SET, press the piston to be programmed.
4. Release both pistons. The new registration is now stored.
Combination Memory Levels
The T787’s advanced combination action has four memory levels, effectively multiplying the
number of available combination pistons by four. Pistons stored on one memory level don’t
affect those stored on other memory levels; each of the memories is independent.
Many organists keep regularly used registrations, such as those used for hymns, on one
memory and use other memory levels for preludes, postludes and choral accompaniments,
which may change week to week.
A variety of useful registrations are included with your new Rodgers T787. Memory 1
contains registrations commonly used for church and classical organ literature. Memory 2
contains orchestral registrations, and Memory 3 contains registrations from the Evangelical,
Gospel and Theatre organ traditions.
Memory Levels can be selected by pressing the corresponding piston located on the left-hand
side under the Choir manual. These pistons are labeled
M1 , M2 , M3 or M4 .
To select a memory level:
1. Press the corresponding memory piston ( M1 , M2 , M3 or M4 ). It will light.
When the organ is powered on, M1 is automatically selected.
A memory level must be unlocked before it can be changed. See below.
!
Rodgers SmartCard Memory System™ gives you unlimited memory levels. See page
29 for more information.
!