background image

4

USING THE UNIT SAFELY

 CAUTION

Place in a well ventilated location

The unit should be located so that its 

location or position does not interfere 

with its proper ventilation.

Grasp the plug when connecting or disconnecting 
the power cord

Always grasp only the plug on the 

power-supply cord when plugging into, 

or unplugging from, an outlet.

Periodically clean the power cord’s plug

At regular intervals, you should unplug 

the power plug and clean it by using 

a dry cloth to wipe all dust and other 

accumulations away from its prongs. 

Also, disconnect the power plug from 

the power outlet whenever the unit is to 

remain unused for an extended period of 

time. Any accumulation of dust between 

the power plug and the power outlet can 

result in poor insulation and lead to fire.

Manage cables for safety

Try to prevent cords and cables from 

becoming entangled. Also, all cords and 

cables should be placed so they are out 

of the reach of children.

Avoid climbing on top of the unit, or placing heavy 
objects on it

Never climb on top of, nor place heavy 

objects on the unit.

Do not connect or disconnect the power cord with 
wet hands

Never handle the power cord or its 

plugs with wet hands when plugging 

into, or unplugging from, an outlet.

Cautions when moving this unit

Since this product is very heavy, you 

must make sure that a sufficient number 

of people are on hand to help, so you can 

lift and move it safely, without causing 

strain. Make sure to have a firm grip, 

to protect yourself from injury and the 

instrument from damage. 

If you need to move the instrument, 

consult with your retailer, or Rodgers 

Instruments Corporation, as listed on the 

“Notice to Users” (p. 6).

Unplug the power cord from the outlet before 
cleaning

Before cleaning the unit, turn it off and 

unplug the power cord from the outlet.

If there is a possibility of lightning strike, disconnect 
the power cord from the outlet

Whenever you suspect the possibility of 

lightning in your area, pull the plug on 

the power cord out of the outlet.

 CAUTION

Take care not to get fingers pinched by lid

Be careful so you don’t get your fingers 

pinched when you handle any moving 

parts such as the following. Adult 

supervision is recommended whenever 

small children use the unit.

•  Lid

Precautions concerning use of bench

When using the bench, please observe 

the following points:

•  Do not allow two or more persons to sit 

on the bench.

•  Do not adjust the height while sitting 

on the bench.

Do not remove the speaker grille and speaker

Do not remove the speaker grille and 

speaker by any means. Speaker not user 

replaceable. Shock hazardous voltages 

and currents are present inside the 

enclosure.

Содержание Infinity organ













































Отзывы: