Rodgers Infinity organ, Руководство пользователя

Страница: 32 / 44

32
Recording Your Performances
Recording a Song
1. From the main screen, press the [STOP] piston to access the “Song Recorder” screen .
MEMO
You can also access the “Song Recorder” screen by Quick Menu.
2.
Press the [REC] piston; the [REC] piston will light .
The [PLAY/PAUSE] piston will blink, and the organ will enter recording-standby mode.
MEMO
If desired, you can sound the metronome while you record.
3. When you play the keyboard, the [PLAY/PAUSE] piston will light and recording will start automatically .
MEMO
You can also start recording by pressing the [PLAY/PAUSE] piston. In this case, recording will begin after two measures have passed. If you’re using the
metronome, the metronome will sound.
4. Press the [STOP] piston to stop recording .
The [PLAY/PAUSE] piston’s light will go out.
Play Back the Recorded Song
1.
Press the [STOP] piston to return to the first measure of the song you recorded .
2. Press the [PLAY/PAUSE] piston to play back the recorded song .
MEMO
Press the [PLAY/PAUSE] piston, you can pause the playback. Playback will resume from the same location when you press the [PLAY/PAUSE] piston
once again.
3. To stop playback, press the [STOP] piston .
Saving a Recorded Song
The song you recorded will be lost when you switch off the organ’s power. If you want to keep the recorded song, you must save it to USB flash drive or to
the organ’s internal memory.
1. If you want to save to USB flash drive, connect your USB flash drive to the USB memory connector (p . 26) .
2.
From the main screen, press the [STOP] piston to access the “Song Recorder” screen .
3. Turn the [Select/Menu] knob to select “Save Song .”
4.
Press the [Select/Menu] knob to access the “Save Song” screen .
5. Turn the [Select/Menu] knob to select “Save to,” and turn the [Value/Exit menu] knob to choose the desired save destination .
Save to Explanation
INTERNAL The song will be saved to internal memory.
USB
The song will be saved to USB flash drive. Shown only if USB flash drive is connected to
the USB memory connector.
6.
Turn the [Select/Menu] knob to select “Name,” and press the [Select/MENU] knob to assign a name to the song .
For details on how to assign a name, refer to “If you want to name the data you’re saving” (p. 34).
MEMO
The song you recorded will automatically be given the name “New Song.”
7.
Turn the [Select/Menu] knob to select “No .”, and turn the [Value/Exit menu] knob to choose the save-destination number .
8. Press the [SET] piston; the data will be saved .
When saving is finished, the name of the newly saved song data will appear.
9.
Press the [Value/Exit Menu] knob twice to return to the main screen .