Rodgers Infinity organ, Руководство пользователя

Страница: 38 / 44

38
Backing Up Data/Performing an Initialization
Returning all Settings to the Factory-
Set State (Factory Reset)
All settings stored in the organ can be reset to their factory-set
condition. This operation is called “Factory Reset.”
NOTE
ѥ ѥ
Factory reset will cause all of the recorded songs, the general memory
pistons, division memory pistons, and all settings stored in the organ
to return to their factory settings. Please copy your settings to USB flash
drive before you proceed.
•
“Backing Up/Loading Data” (p. 38)
1.
From the main screen, press the [Select/Menu] knob .
2. Turn the [Select/Menu] knob to select “Utility .”
3.
Press the [Select/Menu] knob to access the “Utility” screen .
4. Turn the [Select/Menu] knob to select “Factory Reset .”
5. Press the [Select/Menu] knob .
Confirmation screen will appear.
If you decide to cancel, press the [Value/Exit Menu] knob.
6. Press the [SET] piston to execute Factory Reset .
NOTE
ѥ ѥ
The Factory Reset will be executed. Do not turn off the power while
“Executing” is displayed.
7. Turn the power off, then on again .
Backing Up/Loading Data
Here’s how to back up and load data.
1. Connect your USB flash drive to the USB memory connector .
2.
From the main screen, press the [Select/Menu] knob .
3. Turn the [Select/Menu] knob to select “Utility .”
4.
Press the [Select/Menu] knob to access the “Utility” screen .
5. Turn the [Select/Menu] knob to select “Backup/Restore .”
6. Press the [Select/Menu] knob to access the “Backup/Restore”
screen .
7.
Turn the [Select/Menu] knob to select “Direction,” then turn
the [Value/Exit Menu] knob to select either backup or load .
Setting Explanation
BACK UP Select to back up data.
RESTORE Select to load data.
8.
Press the [SET] piston to carry out the data backup or load
procedure .
If you decide to cancel, press the [Value/Exit Menu] knob.
Displaying the Version
Here’s how to check the software version being used.
1. From the main screen, press the [Select/Menu] knob .
2.
Turn the [Select/Menu] knob to select “Utility .”
3. Press the [Select/Menu] knob to access the “Utility” screen .
4.
Turn the [Select/Menu] knob to select “Version .”
5. Press the [Select/Menu] knob to access the “Version ” screen .