Rodec PA1600, Руководство по эксплуатации

Страница: 3 / 26

RODEC
PA 800
-
PA 1600
-
PA 2400
3
MODEL PA800 / PA1600 / PA2400 (please strike out the uncorrect)
SERIAL NUMBER …………………………… (on the back of the set)
Please give model and serial number by when you request info.
Thank you very much for purchasing the
RODEC
power amplifier PA800 / PA1600 / PA2400.
This amplifier is a topline amplifier, capable of outstanding performance in combination with high-
grade systems.
SAFETY INSTRUCTIONS
1)
Do not expose the set to rain or water. Do not spill liquid or insert (metal) objects inside the
set. Rain, water or liquid such as cosmetics as well as metal, may cause electric shocks,
which can result in fire or shock hazard. If anything gets inside, unplug the power cord.
2)
When the amplifier is brought from a cooler place into a hotter place, it is possible that some
condensation water appears, which can cause short circuits. So please let the amplifier reach
room temperature, before switching it on.
3)
When the amplifier is connected to a power generator, must the power generator first be
started up and must be waited with switching on the amplifier till the power generator is
completely started up and delivers a stable output voltage.
4)
Frayed cords and broken plugs may cause a fire or shock hazard. Do not damage the power
cord. When removing the power cord from wall outlet, be sure to unplug by holding the plug
attachment and not pulling the cord.
5)
Do not open the set, there are no serviceable parts inside.
Only qualified service technicians can service inside your set.
6)
Operate the set only from a power source, which is indicated on the rating label at the back of
the set. If the the power source can not supply enough current, the amplifier can give it’s
maximum power
7)
Do not use chemical products to clean the set. Do not use contact spray or other products.
8)
Please turn off the power switch when connecting or disconnecting the speaker- or signal
cables or changing the switches on the back panel.
9)
Do not connect the amplifier’s speaker output connectors to input connectors. Also do not
connect amplifier’s outputs to other amplifiers outputs, to ground connections or to voltage
sources.
INSTALLATION OF THE AMPLIFIER
1)
The set can be used in every position.
2)
Don’t place the set into direct sunlight, or in a warm moist or dusty place.
3)
Be sure that the ventilation grids at front- and backpanel are allways free during use.
4)
To avoid disturbances, do not place the set in the neighbourhood of disturbing apparatuses.
5)
When the amplifier is used in fixed installations, please place them in a separate cool dust-
free room.