RODEC
Multi source
II
2
TABLE OF CONTENTS
-
Specifications
-
2
-
-
Safety
instructions
-
2
-
- Installation of the mixer-pre-amplifier
- 3 -
- Frontpanel, switches and control
- 3 -
-
Connections
-
4
-
-
Operating
instructions
-
5
-
-
Pictures
on
cover
-
22
-
SPECIFICATIONS
Inputs
Input sensitivity
Signal/Noise Remarks
2 x PHONO
6 x LINE
1 x MIC DJ assymm.
2.5mV/47k
Ω
220mV/47k
Ω
2.2mV/1k
Ω
< -68dB
< -96dB
< -65dB
RIAA correction
Outputs
2 x Master assymm.
1 x Recording/Aux
1 x Phones
1.5V/600
Ω
775mV/2.5k
Ω
12V/600
Ω
Phones 600
Ω
-2k
Ω
-
THD:
<
0.02%
- Tone controls:
Bass +/-12dB @ 80Hz
Middle
+/-12dB
@
800Hz
High
+/-12dB
@
7.5kHz
- Power source:
Panels are leaving the factory on: 230V / 50Hz-60Hz
on
request:
100V-117V
/
50Hz-60Hz
-
Fuse:
T250mA/230VAC
-
T500mA/110VAC
- Power consumption:
OFF=0VA
ON=22VA
-
Approbation:
CE
- Dimensions:
Front: 482mm x 89mm (19” x 2HE)
Chassis: 440mm x 223mm x 92mm
-
Weight: 3.0kg
DESIGN AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE.
MODEL Multi source II
SERIAL NUMBER …………………………… (on the back of the set)
Please give model and serial number when you request info.
Thank you very much for purchasing the
RODEC
mixer-pre-amplifier Multi source II.
This mixing panel is a topline-mixing panel, capable of outstanding performance in combination with
high-grade systems.
SAFETY INSTRUCTIONS
1)
Do not expose the set to rain or water. Do not spill liquid or insert (metal) objects inside the
set. Rain, water or liquid such as cosmetics as well as metal, may cause electric shocks,
which can result in fire or shock hazard. If anything gets inside, unplug the power cord.
2)
Frayed cords and broken plugs may cause a fire or shock hazard. Do not damage the power
cord. When removing the power cord from wall outlet, be sure to unplug by holding the plug
attachment and not by pulling the cord.
3)
Do not open the set, there are no serviceable parts inside.
