Rockwell Automation Allen-Bradley ControlNet 1786 Series, Руководство по установке

Страница: 51 / 74

Publication CNET-IN002A-EN-P - December 2001
Install a ControlNet Coax Media System 3-15
3. With the center pin in place, use the crimp tool to crimp the pin
into place.
4. Slide the ControlNet connector onto the cable.
41890
Push the flare/calibration tool gently and
rotate slightly onto the connector while
applying pressure. This will work the
base of the connector underneath
the wire braid slowly.
41903
The smaller hexagonal crimping notch is
for crimping the center pin onto the
center connector.
Check for braid strands that
could cause a short to center
conductor.
41896
braid and tape shields
connector base