manualshive.com logo in svg

Roche Accutrend GC, Руководство пользователя

Поделиться
Скачать
Roche Accutrend GC Скачать руководство пользователя страница 54

8.

102

103

8.2 System components

For measurement of blood glucose with Accutrend

®

GC use

only 

Accutrend

®

Glucose

test strips. These are available in

different pack sizes. For further information please ask your
pharmacist or your Roche Diagnostics office.

For measurement of cholesterol with the Accutrend

®

GC use

only 

Accutrend

®

Cholesterol

test strips. 

For performance checks with control solutions use only

Accutrend

®

Control G

and 

Accutrend

®

Control CH1

.

Recommended lancing device: the Accu-Chek

®

Softclix

®

Pro

lancing device with matching lancets 

Accu-Chek

®

Softclix

®

Pro Lancet,

which are specially designed to make

blood collection virtually pain-free.

Battery life:

At least 1000 measurements

Storage conditions:

Temperature –25°C to +65°C 
Relative humidity below 85%.

Disposal:

The outer packaging can be 
disposed of as household waste. 
For disposal of the meter the rele-
vant legal regulations should be
observed, after consultation of
your local community if applica-
ble.
This product fulfils the require-
ments of Directive 98/79/EC on in
vitro diagnostic devices.

This Accutrend

®

GC meter has been designed and tested in

accordance with German standards for electronic instruments
(DIN, VDE, IEC). The meter left the factory in perfect compli-
ance with the specified safety regulations. In order to preserve
this condition and to ensure reliable operation, the user must
observe the safety warnings in these operating instructions.

The manufacturer reserves the right to modify the system.

0088

011553 AccuGC GB  19.02.2002  10:40 Uhr  Seite 102

Содержание Accutrend GC



























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды